K-11 waterproof acrylic paint (two component)
Polymer cement waterproof paint is a newly developed waterproof
bicomponent acrylic material, it combines the flexibility of
organic materials and inorganic materials, such as the
characteristics of durability than the one-component acrylic
waterproof coating has better water resistance, viscosity attached
to power more, however, even if the scope of application of the
advantages of speech. Can be widely used in the basement of the old
and the new construction, road and bridge, level and the wall,
kitchen and toilet, storage, swimming pools, etc., and the wave of
water.
Performance characteristics:
Wet or dry in a variety of materials of
construction of the base surface directly.
Coating strength, good elasticity,
excellent durability.
Non-toxic, odorless, environmentally
friendly products.
Construction is simple, fast curing, a
short period.
With rubber and good adhesion.
And concrete has good adhesion to bridge
cracks in concrete to prevent concrete carbonation
Of carbon dioxide has excellent corrosion
resistance.
Excellent anti-corrosion effect and to
prevent carbonation to extend the life of the building period.
Implementation of standards and physical
properties (Executive standard: JC/T894-2001)
Construction method
1, removal of the grass-roots level the surface of floating ash,
oil, or loose objects such as impurities, base must be firm,
smooth, non-Mingshui for cracks or uneven surface of the base after
the first smooth construction. Nozzle, floor drain, the scope of
the corner, first of all should be up and strengthen the local
water level to deal with.
2, this product will be used blender two groups according to the
provisions of the ratio of (A group of: B-component = 1:1.3-1.5)
homogeneous mixing of particle-free base.
3, the product evenly brushing face in dealing with a good base,
and basically dry and then painted a second time, and the third
time, until the coating thickness to achieve the construction
design requirements.
4, each time interval before brushing the coating layer of dry
solid, non-stick, whichever hand, should try to do more than brush
a thin coating.
5, brushing process can be reinforced materials such as: non-woven
fabric, such as glass fiber cloth used.
6,surface dry weather overheating, water should be brushing after
wetting, Prime coating and the substrate surface to increase
bonding strength.
Manufacturer: Stephen Shing-hing, Xiamen Industrial & Trade
Co., Ltd.
Address: Huli District, Xiamen Industrial Zone bell housing on the
5th
TEL: 0592-5793215 18950003215
FAX: 0592-5779315
A unified national service hotline :400-6618-215
URL: www.xmxqs.com
